THE DATA beneath
the feel.

04 / Custom Telemetry

Most suspension leaves the factory tuned for an average rider on average terrain. You are not average. Custom tuning and data-led telemetry are how we fix that — rebuilding your damper internals from scratch around the way you actually ride.

Fork & Rear Shock Shim Stack Revalve Data Acquisition On-Trail Capture Custom Internals Custom Machining
Service 01 — Standalone

Custom Tuning.

Your fork and shock leave the factory set up for a theoretical average — average weight, average speed, average terrain. Custom tuning tears that out and replaces it with something built for you. Trav strips the damper, redesigns the shim stack and revalves the internals around your weight, your riding style and the terrain you actually ride. Where needed, he'll machine or source custom internal pieces that the off-the-shelf shims can't match.

What gets changed

  • Compression and rebound shim stack redesign
  • Damping curve adjusted for rider weight and terrain
  • Custom-machined or sourced internal components
  • High-speed and low-speed damping tuned independently
  • Full rebuild, re-bleed and recommission
  • Works on fork and/or rear shock

Result: Suspension that responds the way it should for your body and your trails — not the showroom floor.

Service 02 — Add-on or Standalone

Telemetry.

Data logging sensors fitted directly to your fork and shock capture how your suspension moves through real riding — not estimates, not feel, but millisecond-by-millisecond measurement. Compression, rebound, harshness, bottom-outs, support, mid-stroke — all of it recorded, then brought back to the workshop and analysed against your terrain and feedback. Telemetry turns suspension tuning from an educated guess into a precision process.

What gets measured

  • Suspension travel and velocity — fork and shock
  • Compression and rebound characteristics
  • Bottom-out frequency and severity
  • Harshness and small-bump sensitivity
  • Mid-stroke support and progression
  • Before/after comparison runs

Result: A measurable, repeatable result — not just "feels better." Changes validated by data, not feel alone.

What we offer

Two services.
One workshop.

The Full Package

When tuning
meets
data.

Custom tuning and telemetry work best together. The data tells us exactly what the suspension is doing. The tune fixes it. A second round of logging confirms the improvement is real — measurable, not just felt. This is the service that gets closest to what factory race teams pay for.

01

Consultation & Baseline

Rider weight, terrain, riding style and goals. We establish what you're chasing before the sensors come out.

02

Sensor Fitting & Data Capture

Telemetry sensors fitted to fork and shock. You ride your trails. We log every millisecond of movement — compression, rebound, bottom-outs, harshness.

03

Data Analysis

Back at the workshop, suspension behaviour is mapped against terrain and rider feedback. Weak points are identified precisely — no guessing.

04

Custom Tune Build

Shim stacks redesigned, custom internals sourced or machined, damper rebuilt and re-bled to the data-informed specification.

05

Validation Run

A second data capture run on the same trails. The improvement is confirmed against the original baseline — measurable, not just felt.

The numbers

What the
sensors
capture.

The telemetry system logs suspension movement at high frequency — far beyond what feel alone can distinguish. Every run is stored and compared. The result is a precise, repeatable picture of what your suspension is actually doing under load, on terrain, at speed.

1000
Hz Sampling Rate
Measurements per second, per sensor
2
Sensors
Fork and rear shock logged simultaneously
100%
Real Trail Data
No dyno estimates — your trails, your riding
Before
& after
Validation
Improvement confirmed by a second data run

"Some workshops call adjusting air pressure and clicking rebound 'tuning.' We call that setup — it's something you can do at home. What we do is take your damper apart, redesign the shim stack and rebuild it around you. That's the difference between a bike that works and a bike that's yours."


Pricing

What it costs.

Pricing is calculated per item (fork or shock) and per service. Every quote is unique — condition, complexity and the spec of internal components all affect the final figure. We'll confirm before we start work.

01 / Custom Tuning

Custom Tune.

FROM $450 AUD / Item — From

Shim stack redesign and full damper rebuild around your weight, terrain and riding style. Works independently of telemetry — based on rider consultation and Trav's experience.

Includes

  • Full damper strip and inspect
  • Shim stack redesign — custom or off-shelf
  • Custom internal components where required
  • Re-bleed with high-performance oil
  • Recommission and setup

02 / Tuning + Telemetry

Custom Tune
+ Data.

POA Contact for quote

The full package — telemetry data capture, analysis, custom tune build and a validation run. Pricing depends on the number of items, number of data sessions and internal component requirements.

Includes everything in Custom Tune, plus

  • Telemetry sensor fitting
  • On-trail data capture run
  • Full data analysis and tune specification
  • Validation run post-tune
  • Before/after data report

Not sure where
to start?
Talk to us first.